If you read Part 1, you know the basic steps that we took to learn the rules, plan out our materials list, and estimate the costs of building our fence. Now for the fun part.

Part 2: Building a cedar fence

Purchasing Lumber:

As I mentioned, to get the best price possible, we bought our materials at two different stores. Tools, concrete, posts, rails, and small pickets we purchased at Lowes. Our 6′ privacy pickets came from a local lumber yard. Here’s a super important tip: Pick out your lumber yourself!! You will inevitably have a couple posts or rails that are not 100% perfect, and some pickets that may be split or bent, but you will minimize your waste factor by physically going through the stock pile at the warehouse and choosing the best ones. It really doesn’t take too long to pick up each piece, close one eye and sight down the board. You will be surprised how easily you can spot the badly warped rails or pickets, which you can leave at the store.

The one major project that we tackled upon buying our house was to build a fence. The house itself was done, but there was no fence, which is a problem for Reagan (she is usually very good about staying near the house, but one time before we had the fence up, she disappeared when we let her out for a minute. We were on our way out to go to dog obedience school, no joke. The little shit must have sensed it. We got a couple of phone calls and found her making friends at the dry cleaners a couple blocks down the road). So even though we closed on the house and moved in mid-fall, we knew going in that this project was non-negotiable. Jesse used to have a little business where he and a friend put up vinyl fences, which it turns out is almost nothing like putting up a wooden fence. He is quite handy though, and we’re not afraid to dig in and figure out a solution. We also knew that paying for professional labor would cost us an arm and a leg, and we weren’t about to watch someone else put up our white brown picket fence, only to nit-pick at how we could have done it better (“they didn’t install the damn screws straight!”). So here’s how we went about it.

Part 1: Planning a cedar fence